Motility improves when the molecular cluster is smaller. Small clusters make it easier to dissolute and excrete waste matter within the body. This fact is important because excess waste matter is the reason for aging and disease. Alkaline ionized water has small clusters with high motility and dissolute, so you excrete waste matter from the body rapidly.
2) Abundant active mineral Minerals are also called inorganic matter or mineral matter. There are many kinds of minerals. They are found in animals and vegetables, food and water. These minerals smoothen our living activities and maintain a balance. ; Mineral absorption - Activated form of minerals are much better absorbed in the body.
3) Good restoration
Controls saprogenic bacteria in organs and increases beneficial bacteria. There are about 100 kinds of bacteria, up to a trillion microorganisms living in the large intestine, and are classified as both beneficial and harmful depending on the bacteria species. Alkaline ionized water controls the saprogenic bacteria to prevent disease. Alkaline ionized water is the only water that can restore and help beneficial bacteria in the body.
Eliminates active oxygen
Active oxygen is oxygen that easily bonds or combines with surrounding substances. Active oxygen is unstable and therefore has with fewer electrons. The active oxygen possesses higher oxidizing power, and is related directly to aging and disease.
4) Abundant hexagonal water
Water molecules consist of 13 ~ 15 molecules. Hexagonal water, water clustered with 6 water molecules, is the most stable and natural to the human body. One human body cell molecule is connected to about 70,000, 60~65% of them are hexagonal water molecules. The body favors this kind of water. The cell that suffers with diseases has less hexagonal water.
- Lower the temperature of water like iced water.
- Electrolyze water with abundant mineral.
- Go through magnetic treatment.
1) Acidity and alkalinity
PH= the unit that indicates the density of acid and alkaline in water.
Water becomes acidic with increased oxalic acid, and alkaline with increased hydrogen ions. The measuring unit of acidity and alkalinity is indicated by PH values, e.g., PH 7 is considered neutral. Each numerical increment indicates 10 times more hydrogen ions or oxalic acid. For example, an increase of 1 in a PH table means 10 times more alkalinity. A decrease of 1 means 10 times more acidity.
2) Maintaining PH balance
The human body tends to maintain body fluid at PH7.3 according to the homeostasis function. The body tries to maintain the balance of each organ with alkaline body fluid of PH8.8 from the pancreases as the peak. However, consistent acidic constitution will result in lowering one\'s self-protection function in the body. Even though there is no visible sign of disease, alkaline water drinking will support the body with homeostasis functions. Alkaline water drinking also prevents geriatric disease because it defends the body against acidification of the physical constitution.
The ideal operating pressure for a RO (reverse osmosis) unit is 65 psi (pounds per square inch). An operating pressure of 45 psi will reduce the output of a unit by 50%. There are pressure gauges available to monitor the operating pressure of the system. If the operating pressure is too low, an RO pressure boosting pump can be added to increase the operating pressure to the ideal range.
The temperature of the source water should ideally be in the 70° to 77°F range for optimal performance. A temperature of 50°F, or lower, will reduce the output of the unit by 50% or more. Either hot or a mix of hot/cold tap water should never be used for the source water due to the minerals that are added to the water from most water heaters.
Finally, the amount of total dissolved solids in the source water can reduce the amount of water produced by a RO unit. If your source water contains a higher concentration, it would be wise to install a mechanical pre-filter in line prior to the unit. These filters are available at most hardware stores. Because of the requirements of reverse osmosis units, it is wise to purchase a unit that is rated above the gallons per day that your needs require.
Use a conductivity meter (TDS meter), which will accurately measure the amount of impurities in the RO product water. Whereas regular tap water will have a reading in the range of 300-500, purified water should be in the range of 5-25.
Measure the general hardness, alkalinity, and pH of the water with a test kit. Purified water will have a general hardness of 0 GH, alkalinity of 0 dKH, and a PH of 7.0. If your test values vary from those described above, you may need to replace the membrane.
The lifespan of the RO membrane depends upon the quality of your source water. Under most conditions, an RO membrane will produce about 25,000 gallons of purified water and last 2-3 years. However, high concentrations of certain minerals such as calcium, iron, and magnesium will shorten the lifespan of the membrane.